March 2016 - Microwave Link

1024QAM Microwave Links for High Capacity Wireless Transmission

High Capacity Microwave Links from leading vendors use 1024QAM modulation to achieve high capacity, spectral density and efficiency without sacrificing reliability. This technology sets a new benchmark for microwave transmission capacity for operators including 4G / LTE Backhaul links for mobile operators as well as last-mile links, backbone and other applications.

High Capacity Links require High Order QAM modulation

Leading long-haul microwave equipment vendors are now using dependable long-distance transmissions using 1024 QAM. Relative to the industry-standard 256 QAM, this represents a 25% increase in capacity (and up to double the capacity of legacy SDH links), with all other factors the same. Compared to older 4QAM modulation the increase to 1024QAM is five-fold. Operators of long-haul microwave links will certainly enjoy the boost to their capacity with 1024 QAM, especially when these upgrades are relatively painless and generally require only a minor and quick swap of equipment.

Adaptive Coding and Modulation (ACM)

Leading microwave equipment vendors are able to keep their long-haul transmission links operational even in transient fade and noisy conditions. The enabling technology is ACM: Adaptive Coding and Modulation. Microwave links with ACM technology automatically sense the quality of the transmission link and can automatically decrease the modulation technique in case of degraded signal quality due to interference or other microwave propagation problems such as weather. So, if a microwave transmission is operating at maximum capacity using 1024QAM and suddenly encounters interference or high rainfall, a system such as the CableFree microwave system automatically steps down the modulation to lower levels until the transmission network, although at lower capacity now, maintains the ultra high level of link reliability and availability. As the temporary weather effects disappear, the microwave system automatically re-applies more efficient higher-order modulation techniques to regain full capacity.

Overcoming Tradeoffs due to High Order QAM Modulation

CableFree 1024QAM modulation tradeoffs With increasing modulation the receiver sensitivity is greatly reduced, and generally transmit power has to be reduced due to linearity constraints in the transmitter. For fixed modulation speeds the result is either increase of antenna size or reduced distances, which may prevent an operator upgrading to higher capacity. The use of ACM allows use of 1024QAM whilst avoiding sacrifice of distance or antenna sizes, by graceful step-down of modulation to lower rates during rare periods of high rainfall.

Use along with other bandwidth-enhancing technologies such as XPIC

1024QAM modulation is fully compatible with other methods to increase capacity such as XPIC (Cross Polar Interference Cancellation). An advanced microwave modem featuring 1024QAM and XPIC can greatly increase capacity. XPIC alone offers double the capacity compared to a single polarised non-XPIC solution.

1024QAM Microwave Summary

These latest advancements in advanced microwave modulation offer network operators an easy and inexpensive upgrade path to higher capacities to meet demand. Advanced modulation technology of 1024QAM is fully shipping and available today and offers a very cost-effective way to boost capacity in long-haul microwave applications.

For Further Information

For More Information on High Capacity Microwave Solutions, Please Contact Us

Automatic Coding and Modulation (ACM)

Microwave Adaptive Coding and Modulation (ACM)

Adaptive Coding and Modulation or Link adaptation is a term used in wireless communications to denote the matching of the modulation, coding and other signal and protocol parameters to the conditions on the radio link (e.g. the pathloss, the interference due to signals coming from other transmitters, the sensitivity of the receiver, the available transmitter power margin, etc.). In a digital Microwave Link ACM uses a rate adaptation algorithm that adapts the modulation and coding scheme (MCS) according to the quality of the radio channel, and thus the bit rate and robustness of data transmission. The process of link adaptation is a dynamic one and the signal and protocol parameters change as the radio link conditions change.

The Goal of ACM

ACM with 1024 QAM Modulation

The goal of Adaptive Modulation and Coding is to improve the operational efficiency of Microwave links by increasing network capacity over the existing infrastructure – while reducing sensitivity to environmental interferences.
Adaptive Modulation means dynamically varying the modulation in an errorless manner in order to maximize the throughput under momentary propagation conditions. In other words, a system can operate at its maximum throughput under clear sky conditions, and decrease it
gradually under rain fade. For example a link can change from 1024QAM down to QPSK to keep “link alive” without losing connection. Prior to the development of Automatic Coding and Modulation, microwave designers had to design for “worst case” conditions to avoid link outage The benefits of using ACM include:

Longer link lengths (distance)

Using smaller antennas (saves on mast space, also often required in residential areas)

Higher Availability (link reliability)

Importance to Operators of ACM

CableFree Microwave Link using 30cm antenna benefits from ACM giving longer reach and higher availability

Adaptive Coding and Modulation increases the capacity of microwave links without sacrificing distance or availability, and without requiring larger antennas. The penalty – reduced capacity during heavy fade/rainfall – is usually considered an acceptable trade-off compared to the benefits, especially for IP networks where a variable capacity is generally considered acceptable, compared to legacy PDH (NxE1/T1) and SDH connections which are fixed capacity applications. Conversely, ACM allows operators to minimise costs by using smaller antennas, meet higher availability targets (e.g. 99.999% availability) and customer SLA (service level agreement) and also fit within aesthetic and planning constraints in dense urban areas and regions of natural beauty where large antennas may be prohibited by planners or building owners.

Month: March 2016

1024QAM Microwave Links