WR284 | WG10 | R32 Waveguide

WR284 | WG10 | R32 – Rectangular Waveguide Size

WR284 | WG10 | R32 Waveguide Size

  • EIA Standard:WR284
  • RSCS Standard (British Military):WG10
  • IEC Standard:R32

WR284 Specifications

  • Recommended Frequency Band:2.60 to 3.95 GHz
  • Cutoff Frequency of Lowest Order Mode:2.078 GHz
  • Cutoff Frequency of Upper Mode:4.156 GHz
  • Dimension:2.84 Inches [72.136 mm] x 1.34 Inches [34.036 mm]

 

Microwave Waveguide WR2300
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR340 | WG9A | R26 Waveguide

WR340 | WG9A | R26 – Rectangular Waveguide Size

WR340 | WG9A | R26 Waveguide Size

  • EIA Standard:WR340
  • RSCS Standard (British Military):WG9A
  • IEC Standard:R26

WR340 Specifications

  • Recommended Frequency Band:2.20 to 3.30 GHz
  • Cutoff Frequency of Lowest Order Mode:1.736 GHz
  • Cutoff Frequency of Upper Mode:3.471 GHz
  • Dimension:3.4 Inches [86.36 mm] x 1.7 Inches [43.18 mm]

 

Microwave Waveguide WR2300
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR430 | WG8 | R22 Waveguide

WR430 | WG8 | R22 – Rectangular Waveguide Size

WR430 | WG8 | R22 Waveguide Size

  • EIA Standard:WR430
  • RSCS Standard (British Military):WG8
  • IEC Standard:R22

WR430 Specifications

  • Recommended Frequency Band:1.72 to 2.60 GHz
  • Cutoff Frequency of Lowest Order Mode:1.372 GHz
  • Cutoff Frequency of Upper Mode:2.745 GHz
  • Dimension:4.3 Inches [109.22 mm] x 2.15 Inches [54.61 mm]

 

Microwave Waveguide WR430
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR510 | WG7 | R18 Waveguide

WR510 | WG7 | R18 – Rectangular Waveguide Size

Waveguide Size

  • EIA Standard:WR510
  • RSCS Standard (British Military):WG7
  • IEC Standard:R18

WR510 Specifications

  • Recommended Frequency Band:1.45 to 2.20 GHz
  • Cutoff Frequency of Lowest Order Mode:1.157 GHz
  • Cutoff Frequency of Upper Mode:2.314 GHz
  • Dimension:5.1 Inches [129.54 mm] x 2.55 Inches [64.77 mm]

 

Microwave Waveguide WR510
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR650 | WG6 | R14 Waveguide

WR650 | WG6 | R14 – Rectangular Waveguide Size

WR650 | WG6 | R14 Waveguide Size

  • EIA Standard:WR650
  • RSCS Standard (British Military):WG6
  • IEC Standard:R14

WR650 Specifications

  • Recommended Frequency Band:1.15 to 1.72 GHz
  • Cutoff Frequency of Lowest Order Mode:0.908 GHz
  • Cutoff Frequency of Upper Mode:1.816 GHz
  • Dimension:6.5 Inches [165.1 mm] x 3.25 Inches [82.55 mm]

 

Microwave Waveguide WR2300
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR770 | WG5 | R12 Waveguide

WR770 | WG5 | R12 – Rectangular Waveguide Size

Waveguide Size

  • EIA Standard:WR770
  • RSCS Standard (British Military):WG5
  • IEC Standard:R12

WR700 Specifications

  • Recommended Frequency Band:0.97 to 1.45 GHz
  • Cutoff Frequency of Lowest Order Mode:0.766 GHz
  • Cutoff Frequency of Upper Mode:1.533 GHz
  • Dimension:7.7 Inches [195.58 mm] x 3.85 Inches [97.79 mm]

 

Microwave Waveguide WR770
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR975 | WG4 | R9 Waveguide

WR975 | WG4 | R9 – Rectangular Waveguide Size

Waveguide Size

  • EIA Standard:WR975
  • RSCS Standard (British Military):WG4
  • IEC Standard:R9

WR975 Specifications

  • Recommended Frequency Band:0.75 to 1.15 GHz
  • Cutoff Frequency of Lowest Order Mode:0.605 GHz
  • Cutoff Frequency of Upper Mode:1.211 GHz
  • Dimension:9.75 Inches [247.65 mm] x 4.875 Inches [123.825 mm]

 

Microwave Waveguide WR975
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR1150 | WG3 | R8 Waveguide

WR1150 | WG3 | R8 – Rectangular Waveguide Size

Waveguide Size

  • EIA Standard:WR1150
  • RSCS Standard (British Military):WG3
  • IEC Standard:R8

WR1150 Specifications

  • Recommended Frequency Band:0.63 to 0.97 GHz
  • Cutoff Frequency of Lowest Order Mode:0.513 GHz
  • Cutoff Frequency of Upper Mode:1.026 GHz
  • Dimension:11.5 Inches [292.1 mm] x 5.75 Inches [146.05 mm]

 

Microwave Waveguide WR1150
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR1500 | WG2 | R6 Waveguide

WR1500 | WG2 | R6 – Rectangular Waveguide Size

WR1500 Waveguide Size

  • EIA Standard:WR1500
  • RSCS Standard (British Military):WG2
  • IEC Standard:R6

WR1500 Specifications

  • Recommended Frequency Band:0.50 to 0.75 GHz
  • Cutoff Frequency of Lowest Order Mode:0.393 GHz
  • Cutoff Frequency of Upper Mode:0.787 GHz
  • Dimension:15 Inches [381 mm] x 7.5 Inches [190.5 mm]

 

Microwave Waveguide WR1500 WG2 R6
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us

WR1800 | WG1 | R5 Waveguide

WR1800 | WG1 | R5 – Rectangular Waveguide Size

WR1800 Waveguide Size

  • EIA Standard:WR1800
  • RSCS Standard (British Military):WG1
  • IEC Standard:R5

WR1800 Specifications

  • Recommended Frequency Band:0.45 to 0.63 GHz
  • Cutoff Frequency of Lowest Order Mode:0.328 GHz
  • Cutoff Frequency of Upper Mode:0.656 GHz
  • Dimension:18 Inches [457.2 mm] x 9 Inches [228.6 mm]

 

Microwave Waveguide WR1800
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us