OFCOM Channel Plans for Upper 6GHz (U6)
Here is a chart showing channel plans for the UK
The Upper 6GHz Band is defined as follows:
|Standards:||CEPT/ERC/REC 14-02 E
|Frequency Range:||6425 – 7125 MHz|
|Total Width of Band:||700MHz|
|Channel Plan||FDD (Frequency Division Duplex)|
|Channel Widths & Spacing||20, 30, 40, 60MHz|
|Lower Sub-Band||6425-6760MHz (335MHz)|
|Upper Sub-Band||6780-7125MHz (345MHz)|
|T-R Spacings (Transmit to Receive)||340MHz|
Uses & Applications
Upper 6GHz bands are used for Point to Point (P2P) Microwave Radio Links
Sources of Data and Graphics
All contents (C) OFCOM and taken from:
OfW48 UK Frequency Allocations for Fixed (Point-to-Point) Wireless Services and Scanning Telemetry This document shows the current bands managed by Ofcom that are available for fixed terrestrial (point to point) links and scanning telemetry in the UK.
The Radio Equipment and Telecommunications Terminal Equipment Directive
99/5/EC (R&TTED) has been implemented in ‘The Radio Equipment and Telecommunications Terminal Equipment Regulations 2000, Statutory
Instrument (SI) 730. In accordance with Articles 4.1 and 7.2 of the R&TTED
• IR2000: The UK Interface Requirement 2000 contains the requirements for the licensing and use of fixed (point-to-point) wireless services in the UK.
• IR2037: The UK Interface Requirement 2037 applies for scanning telemetry services.
• IR2078: The UK Interface Requirement 2078 applies for the 60 GHz band
Notes specific to the frequency charts
The first column describes each available frequency band, represented by a diagram (not to scale). The frequency band limits are listed below the diagram; frequencies below 10 GHz are represented in MHz, while those above 10 GHz are in GHz. The width of each guard band is shown above the diagram, and is always specified in MHz.
The channel arrangements in some bands are staggered, so that the width and position of the guard band vary for different channel spacings. In these cases, a table underneath gives details of the guard bands for different spacings (with all frequencies in MHz).
The first column also includes the title of the relevant international recommendations for each band, produced by the European Conference of Postal and Telecommunications (CEPT) or the International Telecommunication Union (ITU). CEPT recommendations are available at http://www.cept.org/ecc/ and ITU Recommendations at http://www.itu.int.
The final column contains the channel spacing for duplex operation in each frequency band except for bands above 60 GHz. Details of standard systems assigned in the UK are shown in the relevant technical frequency assignment criteria.
For Further Information
For More Information on Microwave Planning, Please Contact Us