WR75 | WG17 | R120 Waveguide

WR75 | WG17 | R120 – Rectangular Waveguide Size

WR75 | WG17 | R120 Waveguide Size

  • EIA Standard:WR75
  • RSCS Standard (British Military):WG17
  • IEC Standard:R120

WR75 Specifications

  • Recommended Frequency Band:10.00 to 15 GHz
  • Cutoff Frequency of Lowest Order Mode:7.869 GHz
  • Cutoff Frequency of Upper Mode:15.737 GHz
  • Dimension:0.75 Inches [19.05 mm] x 0.375 Inches [9.525 mm]

Commonly Used for Microwave Link Bands

  • 11GHz
  • 13GHz

 

Microwave Waveguide WR75
Microwave Waveguide

Other Names:

UBR120, PBR120

These are  different flange types.  U = Unpressurised, P = Pressurised

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us