Microwave Waveguide

WR10 | WG27 | R900 Waveguide

WR10 | WG27 | R900 – Rectangular Waveguide Size

WR10 | WG27 | R900 Waveguide Size

  • EIA Standard:WR10
  • RSCS Standard (British Military):WG27
  • IEC Standard:R900

WR10 Specifications

  • Recommended Frequency Band:75 to 110 GHz
  • Cutoff Frequency of Lowest Order Mode:59.015 GHz
  • Cutoff Frequency of Upper Mode:118.03 GHz
  • Dimension:0.1 Inches [2.54 mm] x 0.05 Inches [1.27 mm]

Commonly Used for Millimeter Wave (MMW) Link Bands

  • E-Band (71-76GHz and 81-86GHz): 70GHz, 80GHz
Microwave Waveguide WR10
Microwave Waveguide

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.

The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

For Further Information

For More Information on Microwave Planning, Please Contact Us