RadioMobile for Microwave Planning

RadioMobile: Popular software for Microwave Link planning

RadioMobile is a widely-available software package which can be used for Microwave Link planning, including path profiling and clearance criteria, power budgets, choosing antenna sizes and tower heights.

CableFree RadioMobile Microwave Link Planning example
CableFree RadioMobile Microwave Link Planning example

For website for RadioMobile, please see this the relevant website.

RadioMobile functions

For Microwave Link Planning, the software package can be configured with the characteristics of your required radio links.

  • Transmit Power
  • Frequency
  • Antenna Gain
  • Receiver Sensitivity
  • Antenna heights
  • System losses
CableFree RadioMobile Microwave Link Planning 60GHz example
CableFree RadioMobile Microwave Link Planning 60GHz example

Link Budget & Fade Margins

The software enables quick and rapid calculation of link budget and fade margins for any frequency band.

Terrain Database

The software uses the freely available SRTM terrain data which can download “on demand” for calculation of terrain heights.  Combined with LandCover, this enables estimation of trees/forests also.

Line of Sight

The software uses the terrain database to allows quick establishment of available Line of Sight and “what if” adjustment of antenna/tower heights in a microwave radio network design

Radio Fresnel Zone

RadioMobile automatically calculates the Fresnel Zone for any required link, with graphical display enabling quick feasibility and identification of any obstacles to be noted.

Radio Parameters & Network Properties

Any new user to Radio Mobile will have to enter link parameters for the chosen equipment.  This includes transmit power, receive sensitivity and antenna gains.  Some vendors such as CableFree include this data as a planning service with their products

Unit Properties

Radio Mobile: Free to Use

The Radio Mobile software is free to use including for commercial use.  Radio Mobile software is a copyright of Roger Coudé.  The author notes:

Although commercial use is not prohibited, the author cannot be held responsible for its usage. The outputs resulting from the program are under the entire responsibility of the user, and the user should conform to restrictions from external data sources.

For Further information

For More Information about Microwave Link Planning, we will be delighted to answer your questions. Please Contact Us

10Gbps MMW Links installed in the Middle East

CableFree 10Gbps MMW links have been installed in the Middle East for Safe City applications

Using the latest 10Gbps Millimeter Wave wireless technology, the links connect customer sites with a full 10Gbps (10Gig-E) full duplex capacity, with no compression or slow-down.

10Gbps MMW Links installed in the Middle East
10Gbps MMW Links installed in the Middle East

CableFree has pioneered high speed 10 Gigabit Millimeter Wave (MMW) technology to connect sites where fibre optics are unavailable, too slow to provision, too expensive or at risk of damage. In busy cities, fibre optics is usually installed in ducts underground which are prone to disruption when digging or building works take place.

This client had already installed fibre optics for major CCTV backbones around the city. However, 3rd party building works disrupted the ducts severing the fibres, causing major outage in the network and loss of CCTV coverage – putting citizens at risk.

10Gbps MMW Links installed in the Middle East
10Gbps MMW Links installed in the Middle East

CableFree 10Gbps Millimeter Wave links offer an ideal alternative to fragile fibre optics: the radio units are installed on sites owned by the customer, bringing the full network under user control and management. The units are typically mounted on building rooftops well away from street-level disruption, which are easy to access, secure and defend. MMW wireless links can be installed in hours, not weeks, and at a tiny fraction of the cost of trenches and ducts for fibre optics.

Reliable operating distances of 5-8km depending on climatic region are ideal for city-scale networks. A full range of planning tools allows users to predict performance prior to purchase or installation. The E-band (70-80GHz) frequencies are available in many countries with “light license” and are uncongested, with narrow “pencil beams” allowing dense re-use of the spectrum with no interference between links or users. The narrow beams make such link are inherently secure, with proprietary signals and encoding.

ACM Automatic Coding Modulation for 10Gbps MMW LinksFor long links, the Adaptive Coding and Modulation feature enables the MMW link to dynamically adjust modulation in high rainfall conditions to ensure link uptime, capacity and range are maximised. For shorter links and long links in low rainfall regions, the links retain 10Gbps at all times.

10Gbps MMW links are a movable asset: if the network requirements change, or different sites require connecting, the links can be moved to the new sites immediately, retaining all the investment in infrastructure. For Special Events and Disaster Recovery, temporary links can be deployed using generator or alternative “off grid” (Solar + Battery) power if no AC power is available on sites. The units can be mounted on tripods or stationary vehicles as required for rapid deployment.

ACM Automatic Coding Modulation for 10Gbps MMW Links
ACM Automatic Coding Modulation for 10Gbps MMW Links

For mobile operators, advanced features such as IEEE 1588v2, SyncE and management are included which make CableFree MMW ideal for RAN backhaul for 4G & 5G networks. CableFree 10Gbps MMW is upgradable to 20Gbps and 40Gbps with “stacking” giving the very highest throughput in the wireless industry, comparable to fibre optic backbone networks.

For more information please visit the CableFree website or contact our expert team:

www.cablefree.net/10g

Microwave ODU

Microwave ODU (Outdoor Unit)

The term ODU is used in Split-Mount Microwave systems where an Indoor Unit (IDU) is typically mounted in an indoor location (or weatherproof shelter) connected via a coaxial cable to the ODU which is mounted on a rooftop or tower top location.

CableFree Microwave ODU
CableFree Microwave ODU

Often the ODU is direct mounted to a microwave antenna using “Slip fit” waveguide connection.  In some cases, a Flexible Waveguide jumper is used to connect from the ODU to the antenna.

ODU functions

The ODU converts data from the IDU into an RF signal for transmission. It also converts the RF signal from the far end to suitable data to transmit to the IDU. ODUs are weatherproofed units that are mounted on top of a tower either directly connected to a microwave antenna or connected to it through a wave guide.

Generally, Microwave ODUs designed for full duplex operation, with separate signals for transmit and receive.  On the airside interface this corresponds to a “pair” of frequencies, one for transmit, the other for receive.  This is known as “FDD” (Frequency Division Duplexing)

ODU Power and data signals

The ODU receives its power and the data signals from the IDU through a single coaxial cable. ODU parameters are configured and monitored through the IDU.  The DC power, transmit signal, receive signal and some command/control telemetry signals are all combined onto the single coaxial cable.  This use of a single cable is designed to reduce cost and time of installation.

ODu Frequency bands and sub-bands

Each ODU is designed to operate over a predefined frequency sub-band. For example 21.2 – 23.6GHz for a 23GHz system, 17.7 – 19.7GHz for a 18GHz system and 24.5 – 26.5GHz for a 26GHz system as for ODUs.    The sub-band is set in hardware (filters, diplexer) at time of manufacture and cannot be changed in the field.

1+0, 1+1, 2+0 Deployments

Microwave ODUs can be deployed in various configurations.

Microwave ODU in 1+0 Configuration with Antenna
Microwave ODU in 1+0 Configuration with Antenna

The most common is 1+0 which has a single ODU, generally connected directly to the microwave antenna.  1+0 means “unprotected” in that there is no resilience or backup equipment or path.

 

 

 

Two Microwave ODUs in 1+1 HSB or 2+0 configuration with Coupler and Antenna
Two Microwave ODUs in 1+1 HSB or 2+0 configuration with Coupler and Antenna

For resilient networks there are several different configurations.  1+1 in “Hot Standby” is common and typically has a pair of ODUs (one active, one standby) connected via a Microwave Coupler to the antenna.  There is typically a 3dB or 6dB loss in the coupler which splits the power either equally or unequally between the main and standby path.

Other resilient configurations are 1+1 SD (Space Diversity, using separate antennas, one ODU on each) and 1+1 FD (Frequency Diversity)

The other non-resilient configuration is 2+0 which has two ODUs connected to a single antenna via a coupler.  The hardware configuration is identical to 1+1 FD, but the ODUs carry separate signals to increase the overall capacity.

Grounding & Surge Protection

Suitable ground wire should be connected to the ODU ground lug to an appropriate ground point on the antenna mounting or tower for lightning protection.  This grounding is essential to avoid damage due to electrical storms.

In-line Surge Suppressors are used to protect the ODU and IDU from surges that could travel down the cable in the case of extreme surges caused by lightning

The specification of a typical Microwave ODU is shown below.

Typical ODU Features and Specifications:

  • 4-42GHz frequency bands available
  • Fully synthesized design
  • 3.5-56MHz RF channel bandwidths
  • Supports QPSK and 16 to 1024 QAM.  Some ODUs may support 2048QAM
  • Standard and high power options
  • High MTBF, greater than 92.000 hours
  • Software controlled ODU functions
  • Designed to meet FCC, ETSI and CE safety and emission standards
  • Supports popular ITU-R standards and frequency recommendations
  • Software configurable microcontroller for ODU monitor and control settings
  • Low noise figure, low phase noise and high linearity
  • Compact and lightweight design
  • Very high frequency stability +/-2.5 ppm
  • Wide operating temperature range: -40°C to +65°C

For Further information

For More Information about Microwave ODUs, we will be delighted to answer your questions. Please Contact Us