Microwave links using 512QAM, 1024QAM, 2048QAM & 4096QAM (Quadrature Amplitude Modulation)
What is QAM?
Quadrature amplitude modulation (QAM) including 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM, 2048QAM and 4096QAM is both an analog and a digital modulation scheme. It conveys two analog message signals, or two digital bit streams, by changing (modulating) the amplitudes of two carrier waves, using the amplitude-shift keying (ASK) digital modulation scheme or amplitude modulation (AM) analog modulation scheme.
Why are higher QAM levels used?
Modern wireless networks often demand and require higher capacities. For a fixed channel size, increasing QAM modulation level increases the link capacity. Note that incremental capacity gain at low-QAM levels is significant; but at high QAM, the capacity gain is much smaller. For example, increasing
From 1024QAM to 2048QAM gives a 10.83% capacity gain.
From 2048QAM to 4096QAM gives a 9.77% capacity gain.
What are the penalties in higher QAM?
The receiver sensitivity is greatly reduced. For every QAM increment (e.g. 512 to 1024QAM) there is a -3dB degradation in receiver sensitivity. This reduces the range. Due to increased linearity requirements at the transmitter, there is a reduction in transmit power also when QAM level is increased. This may be around 1dB per QAM increment.
Comparing 512-QAM, 1024-QAM, 2048-QAM & 4096-QAM
This article compares 512-QAM vs 1024-QAM vs 2048-QAM vs 4096-QAM and mentions difference between 512-QAM, 1024-QAM, 2048-QAM and 4096-QAM modulation techniques. It mentions advantages and disadvantages of QAM over other modulation types. Links to 16-QAM, 64-QAM and 256-QAM is also mentioned.
Understanding QAM Modulation
Starting with the QAM modulation process at the transmitter to receiver in the wireless baseband (i.e. Physical Layer) chain. We will use the example of 64-QAM to illustrate the process. Each symbol in the QAM constellation represents a unique amplitude and phase. Hence they can be distinguished from the other points at the receiver.
Fig:1, 64-QAM Mapping and Demapping
• As shown in the figure-1, 64-QAM or any other modulation is applied on the input binary bits.
• The QAM modulation converts input bits into complex symbols which represent bits by variation in amplitude/phase of the time domain waveform. Using 64QAM converts 6 bits into one symbol at transmitter.
• The bits to symbols conversion take place at the transmitter while reverse (i.e. symbols to bits) take place at the receiver. At receiver, one symbol gives 6 bits as output of demapper.
• Figure depicts position of QAM mapper and QAM demapper in the baseband transmitter and receiver respectively. The demapping is done after front end synchronization i.e. after channel and other impairments are corrected from the received impaired baseband symbols.
• Data Mapping or modulation process is done before the RF upconversion (U/C) in the transmitter and PA. Due to this, higher order modulation necessitates use of highly linear PA (Power Amplifier) at the transmit end.
QAM Mapping Process
Fig:2, 64-QAM Mapping Process
In 64-QAM, the number 64 refers to 2^6.
Here 6 represents number of bits/symbol which is 6 in 64-QAM.
Similarly it can be applied to other modulation types such as 512-QAM, 1024-QAM, 2048-QAM and 4096-QAM as described below.
Following table mentions 64-QAM encoding rule. Check the encoding rule in the respective wireless standard. KMOD value for 64-QAM is 1/SQRT(42).
|Input bits (b5, b4, b3)||I-Out||Input bits (b2, b1, b0)||Q-Out|
QAM mapper Input parameters : Binary Bits
QAM mapper Output parameters : Complex data (I, Q)
The 64-QAM mapper takes binary input and generates complex data symbols as output. It uses above mentioned encoding table to do the conversion process. Before the coversion process, data is grouped into 6 bits pair. Here, (b5, b4, b3) determines the I value and (b2, b1, b0) determines the Q value.
Example: Binary Input: (b5,b4,b3,b2,b1,b0) = (011011)
Complex Output: (1/SQRT(42))* (7+j*7)
Fig:3, 512-QAM Constellation Diagram
The above figure shows 512-QAM constellation diagram. Note that 16 points do not exist in each of the four quadrants to make total 512 points with 128 points in each quadrant in this modulation type. It is possible to have 9 bits per symbol in 512-QAM also. 512QAM increases capacity by 50% compare to 64-QAM modulation type.
The figure shows a 1024-QAM constellation diagram.
Number of bits per seymbol: 10
Symbol rate: 1/10 of bit rate
Increase in capacity compare to 64-QAM: About 66.66%
Following are the characteristics of 2048-QAM modulation.
Number of bits per seymbol: 11
Symbol rate: 1/11 of bit rate
Increase in capacity from 64-QAM to 1024QAM: 83.33% gain
Increase in capacity from 1024QAM to 2048QAM: 10.83% gain
Total constellation points in one quadrant: 512
Following are the characteristics of 4096-QAM modulation.
Number of bits per symbol: 12
Symbol rate: 1/12 of bit rate
Increase in capacity from 64-QAM to 409QAM: 100% gain
Increase in capacity from 2048QAM to 4096QAM 9.77% gain
Total constellation points in one quadrant: 1024
Advantages of QAM over other modulation types
Following are the advantages of QAM modulation:
• Helps achieve high data rate as more number of bits are carried by one carrier. Due to this it has become popular in modern wireless communication system such as LTE, LTE-Advanced etc. It is also used in latest WLAN technologies such as 802.11n 802.11 ac, 802.11 ad and others.
Disadvantages of QAM over other modulation types
Following are the disadvantages of QAM modulation:
• Though data rate has been increased by mapping more than 1 bits on single carrier, it requires high SNR in order to decode the bits at the receiver.
• Needs high linearity PA (Power Amplifier) in the Transmitter.
• In addition to high SNR, higher modulation techniques need very robust front end algorithms (time, frequency and channel) to decode the symbols without errors.
For Further Information
For More Information on Microwave Links, Please Contact Us